Useful Tips

Piano expert

Pin
Send
Share
Send
Send


Piano care

Piano cleaning

Home cleaning is a common thing and most often more or less regular. At the same time, cleaning the piano comes down to simply erasing dust from its horizontal surfaces. Meanwhile, it would be nice to occasionally be interested in what's inside. And inside there, as a rule, the real thickets of dust and dirt. Some tuners include tuning and cleaning the piano in the price, but of course the easiest.

If you are a happy owner of an expensive imported piano, then from time to time when tuning you can spend money on its more serious cleaning. In other cases, cleaning can be done on their own. It is not that difficult. With a certain amount of care and accuracy, there will be no unnecessary details, and subsequent repairs will not be required. And if the child plays and succeeds in involving him in the process, then at the same time the tour will turn out in half with labor education.

The Soviet classic of the genre, the piano "Red October", is dissected in the photographs. But the model is not so important - the device of others is similar.

I am a good hostess! To a piano with a polish!

Piano Care, Debunking Myths

I am a good hostess! To a piano with a polish!

Professional adjusters constantly have to clean the varnish to give the instruments an attractive appearance.
Mistresses rejoice at the effect produced by the greasy pools of furniture cosmetics. Its shine maskes dirty spots, scratches and scuffs, but more and more layers of dust stick to wet stains, as to glue. In addition, not all varnish coatings and polishes are chemically combined.
To make the piano cover look good, use only dry soft rags and a vacuum cleaner. The use of any polishes, solvents and abrasives requires an accurate understanding of what kind of coating was used to finish the tool, and how to care for it.

Piano and heating season

Piano care

Piano and heating season

With the onset of the heating season, it's time to take care of your tool.

If you have already been able to provide your home with an air conditioner while maintaining a given level of humidity, you can safely skip the next three paragraphs.

For the rest, it's time to think about protecting the instrument from drying out due to the fact that the radiators sharply reduce the level of humidity. For which the piano is unlikely to tell you and thank them.

What to do? Put a humidifier in the room. To plant flowers and do not forget to water them. There are special humidity controls and climate controls for the piano. Cost - from 50 to 1000 dollars. At worst, wet towels on batteries. But this is unaesthetic.

Maintenance and care rules

Piano care

Maintenance and care rules

Wood, cloth and fillets used to make the piano are hygroscopic. They may swell or dry out depending on air humidity. Metal parts, even nickel-plated, rust in high humidity. Therefore, excessively humid and excessively dry air is harmful to the piano. Normal temperatures are from +12 to +25 degrees and air humidity from 50% to 60%. Do not place the tool near heaters, windows, or exterior walls. This causes it to dry or swell. You should also not place the piano close to dry walls (not closer than 10 cm.) The distance from the radiators, windows and external walls is at least 1.5 m. It is also necessary to protect the tool from drafts, direct sunlight.

When transporting the piano in the winter, due to a sharp change in temperature and humidity, do not open the keyboard and top cover during the day so that the mechanism and other internal parts gradually warm up to room temperature. Wet surfaces should not be wiped; it is necessary to wait until they dry. After drying the tool, it must be wiped with a dry wool or flannel cloth. All metal parts must be inspected and, if rust is detected on them, they should also be wiped with a dry cloth.

After delivery to the apartment, the tool must be adjusted and, if necessary, adjusted its mechanism. The tension of the piano strings reaches 15-20 tons (in pianos over 25 tons), which causes significant stresses in the cast-iron frame and wooden parts of the foot. These stresses gradually equalize and the tool comes to a stable state only after a considerable time. In addition, playing the new instrument is accompanied by a gradual compaction of the felts and elongation of the strings. Therefore, during the first year of use, a new instrument must be re-adjusted and adjusted two times even if the instrument was not played. This work should be performed by experienced craftsmen.

It is necessary to remove dust from the outer surfaces of the tool with a flannel cloth, without making strong pressures, since polishing fades from frequent wiping. Once a year, it is necessary to remove dust inside the piano case with a vacuum cleaner. To protect against moths, gauze bags with naphthalene or antimole should be placed inside the piano.

It is not recommended to place various objects on the top cover of the piano, since besides damage to the polishing, they can cause overtones when playing, It is strictly forbidden to place flowers in pots (and water them) on the piano! Those who want to independently regulate and tune their piano need to know what to follow.

How to care for a piano

Piano care

How to care for a piano

Keyboard musical instruments - the piano - have a complex mechanism and a carefully finished polished body. In view of this, they need careful and skillful handling during transportation, keeping them under certain conditions and in constant care.

1. The wood and cloth used to make the piano are hygroscopic: they can swell or dry out depending on air humidity. In order to protect the instrument from malfunctions, it is necessary to store it in normal conditions, which are the air temperature from +12 C to +25 C and air humidity of 42%. Help: air humidity in the summer is about 90%, in the winter (in residential premises) about 10-20 %
Humidity is controlled with a hygrometer and maintained with a humidifier.

2. Do not place the tool near radiators, windows, doors and exterior walls, it is also necessary to protect it from drafts.

3. In the winter season, a tool falling from a street into a residential building is exposed to a sharp change in temperature and humidity. In this case, do not open the keyboard and top covers during the day, so that the mechanism and other internal parts of the piano gradually warm up to room temperature. The outer surfaces of the tool may sweat, i.e. get wet. Wet surfaces should not be wiped, it is necessary to wait until they dry. After drying the tool, it must be thoroughly wiped with a dry soft wool or flannel rag, especially all metal parts.

4. A new tool, after delivery to the consumer’s apartment should be checked and, if necessary, adjusted its mechanism, set up.

Pin
Send
Share
Send
Send